Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

English
German

Translating step 1

Step 1
Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver. Carefully separate the two halves of the Joy-Con.  Be gentle—there are ribbon cables connecting them inside. Remove the single #00 Phillips screw holding the black plastic shell in place.
Opening the Joy-Con
  • Remove the 4 screws on the back of the Joy-Con using a Tri-Point Y00 Screwdriver.

  • Carefully separate the two halves of the Joy-Con. Be gentle—there are ribbon cables connecting them inside.

  • Remove the single #00 Phillips screw holding the black plastic shell in place.

Entferne die vier Tri-Point Y00 Schrauben auf der Rückseite des Joy-Cons.

Trenne vorsichtig die beiden Hälften des Joy-Cons. Arbeite bedächtig - innen sind sie durch Flachbandkabel miteinander verbunden.

Entferne die einzelne Kreuzschlitzschraube #00, mit der die schwarze Kunstoffabdeckung befestigt ist.

Your contributions are licensed under the open source Creative Commons license.