Skip to main content
English
Italian

Translating step 5

Step 5
On the bottom, unscrew the four 15mm Phillips Head #2 screws, using a Phillips head #2 screwdriver. Pry up at the location marked, and remove the plastic end cap Pry up at the location marked, and remove the plastic end cap
  • On the bottom, unscrew the four 15mm Phillips Head #2 screws, using a Phillips head #2 screwdriver.

  • Pry up at the location marked, and remove the plastic end cap

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.