Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

English
Japanese

Translating step 3

Step 3
Lift the display up from the frame and remove it from the iMac. It may be necessary to slowly lift from one side to peel against the remaining adhesive. Be very careful handling the display—it's big, heavy, and made of glass.
  • Lift the display up from the frame and remove it from the iMac.

  • It may be necessary to slowly lift from one side to peel against the remaining adhesive.

  • Be very careful handling the display—it's big, heavy, and made of glass.

  • After the adhesive is cut, it cannot be used to re-seal the display in place. Follow this guide to replace the adhesive strips that secure the display to the rear enclosure.

フレームからディスプレイを持ち上げて、iMacから取り外します。

接着剤を剥がすため、必要に応じて片側からゆっくりと持ち上げてから、反対側も持ち上げます。

ディスプレイを取り扱う際は、十分ご注意ください。重量があり、大きく、ガラス製です。

接着剤が切断したら、再利用できません。このガイドに従って、ディスプレイとリアとリアエンクロージャーを固定するために接着ストリップを交換します。

Your contributions are licensed under the open source Creative Commons license.