Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 24 guides that include this step.

English
German

Translating step 5

Step 5
Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.
  • Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.

  • When replacing these screws, you must reinstall each screw in the correct order. Begin by installing the screw closest to the display hinge, and go out from there.

  • During reassembly, make sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.