Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

English
French

Translating step 2

Step 2
Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion. Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion.
  • Unscrew and remove the 5.0mm screw that was behind the sticker using a T8 security Torx screwdriver with a counter-clockwise motion.

Dévissez et retirez la vis de 5,0 mm qui se trouvait derrière l'autocollant à l'aide d'un tournevis Torx de sécurité T8 avec un mouvement dans le sens antihoraire.

Your contributions are licensed under the open source Creative Commons license.