Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Japanese

Translating step 3

Step 3
Remove the following ten screws securing the heat sink to the logic board:
  • Remove the following ten screws securing the heat sink to the logic board:

  • Two 2.4 mm T5 Torx screws

  • Six 3.4 mm T5 Torx screws

  • One 5.2 mm Raised Head T5 Torx screw

  • One 3.5 mm T5 Torx screw

基板にヒートシンクを固定している次のネジを外します。

2.4 mm T5トルクスネジー2本

3.4 mm T5トルクスネジー6本

5.2 mm T5ナベ頭組込ネジー1本

3.5 mm T5ネジー1本

Your contributions are licensed under the open source Creative Commons license.