Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
Spanish

Translating step 3

Step 3
Remove the following ten screws securing the heat sink to the logic board:
  • Remove the following ten screws securing the heat sink to the logic board:

  • Two 2.4 mm T5 Torx screws

  • Six 3.4 mm T5 Torx screws

  • One 5.2 mm Raised Head T5 Torx screw

  • One 3.5 mm T5 Torx screw

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.