Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

English
German

Translating step 3

Step 3
Remove the following ten screws securing the heat sink to the logic board:
  • Remove the following ten screws securing the heat sink to the logic board:

  • Two 2.4 mm T5 Torx screws

  • Six 3.4 mm T5 Torx screws

  • One 5.2 mm Raised Head T5 Torx screw

  • One 3.5 mm T5 Torx screw

Entferne folgende zehn Torx T5 Schrauben, mit denen der Kühlkörper am Logic Board befestigt ist:

Zwei 2,4 mm Schrauben

Sechs 3,4 mm Schrauben

Eine 5,2 mm Schraube mit höherem Kopf

Eine 3,5 mm Schraube

Your contributions are licensed under the open source Creative Commons license.