Skip to main content

Fix Your Stuff

Right to Repair

Store

English
German

Translating step 3

Step 3
Use the point of a spudger to pry up and disconnect the interconnect cable from the motherboard. To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the socket.
  • Use the point of a spudger to pry up and disconnect the interconnect cable from the motherboard.

  • To reconnect during reinstallation, align the cable with the socket and use your finger to press down on one side, followed by the other. If done correctly, the cable should be firmly held in place by the socket.

Löse den Stecker ab, indem du ihn mit einem Plastiköffnungswerkzeug vorsichtig nach rechts ziehst.

Wenn du zu stark ziehst, kannst du eventuell den schwarzen Stecker und/oder das Kabel beschädigen.

[* red] Usingblack] Use the point of a blue plastic opening tool, detachspudger to pry up and disconnect the connector by gently pullinginterconnect cable from the motherboard.
[* icon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger
to press down on one side, followed by the right.
[* icon_note] Applying too much force may result in damaging
other. If done correctly, the black connector and/orcable should be firmly held in place by the cablesocket.
[* red] Usingblack] Use the point of a blue plastic opening tool, detachspudger to pry up and disconnect the connector by gently pullinginterconnect cable from the motherboard.
[* icon_reminder] To reconnect during reinstallation, align the cable with the socket and use your finger
to press down on one side, followed by the right.
[* icon_note] Applying too much force may result in damaging
other. If done correctly, the black connector and/orcable should be firmly held in place by the cablesocket.

Your contributions are licensed under the open source Creative Commons license.