Translating step 6
Step 6


(HP UEFI) 15% lockout bypass
-
Plug the laptop in and turn it on; unplug it once it is on. Press ESC and select System Diagnostics.
-
Open the Component tests submenu. Select Memory or Hard Drive.
-
Select Extensive test. Choose Loop until error.
-
When the laptop shuts off, immediately recharge the battery.
[title] ( [* icon_caution] '''''This will fully discharge the battery. |
[title] ( [* icon_caution] '''''This will fully discharge the battery. |
[* red] Plug the laptop in and turn it on; unplug it once it is on. Press '''''ESC''''' and select '''''System Diagnostics'''''. |
[* orange] Open the '''''Component tests''''' submenu. Select '''''Memory or Hard Drive'''''. |
[* yellow] Select '''''Extensive test'''''. Choose '''''Loop until error'''''. |
[* green] '''''When the laptop shuts off, immediately recharge the battery.''''' |
Your contributions are licensed under the open source Creative Commons license.