Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

English
English

Translating step 1

Step 1
Use the flat end of a spudger to disconnect the rear-facing camera's press connector from its socket on the logic board. Use the flat end of a spudger to disconnect the rear-facing camera's press connector from its socket on the logic board.
  • Use the flat end of a spudger to disconnect the rear-facing camera's press connector from its socket on the logic board.

Use the flat end of a spudger to disconnect the rear-facing camera's press connector from its socket on the logic board.

Your contributions are licensed under the open source Creative Commons license.