Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 12 guides that include this step.

English
German

Translating step 3

Step 3
Remove the two tri-point Y000 screws securing the bracket over the front panel sensor assembly connector: One 1.0 mm screw
  • Remove the two tri-point Y000 screws securing the bracket over the front panel sensor assembly connector:

  • One 1.0 mm screw

  • One 1.2 mm screw

Entferne die beiden TriPoint Y000 Schrauben, welche die Halterung über dem Verbinder der Sensoreinheit am Front Panel befestigen:

Eine 1,0 mm Schraube

Eine 1,2 mm Schraube

Your contributions are licensed under the open source Creative Commons license.