Skip to main content
English
French

Translating step 6

Step 6
Flip the black clips of the connectors into the opposite direction. Remove the lens and CCD cable. Remove the two screws securing the lens to the midframe. These are missing screws for the CCD sensor, lost in a previous dismantling.
  • Flip the black clips of the connectors into the opposite direction. Remove the lens and CCD cable.

  • Remove the two screws securing the lens to the midframe.

  • These are missing screws for the CCD sensor, lost in a previous dismantling.

  • Remove the single screw securing the lens to the mid-frame. The lens will now be loose.

  • Push the lens out of the frame in an angular direction, and remove.

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.