Skip to main content

Fix Your Stuff

Right to Repair



Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.


Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.


Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.


Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Flathead Screwdriver
  • 1 × Magnetic Phillips Screwdriver
  • 1 × Wire Stripper
  • 1 × Wire Cutter
  • 1 × Crimping Tool
  • 1 × Lighter (if using Heat Shrink Tubing)
  • 1 × Metra 99-8902 Dash Kit (For Single Din Stereos)
  • 1 × Wiring Harness (Dependent on Stereo)
  • 1 × Single Din Aftermarket Stereo
  • 1 × Metal Stereo Sleeve Adapter (included with Stereo)
  • 1 × Crimp Caps OR Butt Connectors OR Heat Shrink Tubing for 18 Gauge Wire
Add New

Your contributions are licensed under the open source Creative Commons license.