Skip to main content

Time Estimate

Select a difficulty level for this entire task (including any prerequisite instructions). The difficulty ranking reflects the experience, physical dexterity, and risk involved.

Very easy

Does not require opening device.


Requires minimal disassembly and requires only basic tools like a Phillips or flat-head screwdriver.


Requires a fair amount of disassembly. This is a task that most people would not perform without instruction.


Requires significant disassembly and may require specialized tasks like soldering.

Very difficult

This task is considered quite challenging, may require specialized tasks like micro-soldering, and may risk damage to the device. If you can do this, people may call you MacGyver on occasion.

  • Xbox 360 S Top Panel Replacement
  • Xbox 360 S Hard Drive Replacement
  • Xbox 360 S Bottom Panel Replacement
  • Xbox 360 S Left Case Replacement
  • Xbox 360 S Faceplate Replacement
  • Xbox 360 S RF Module Replacement
  • Xbox 360 S Wi-Fi Board Replacement

If your guide picks up where an existing guide leaves off, add the existing guide as a prerequisite to avoid having to write additional steps. Prerequisite guides will be displayed before this guide. Make sure that the prerequisite guides are in the correct order. You can change the prerequisite order by dragging the icons to the left of the guide's name.

  • 1 × Metal Spudger
  • 1 × Spudger
  • 1 × TR9 Torx Security Screwdriver
  • 1 × TR10 Torx Security Screwdriver
  • 1 × Xbox 360 S Right Case
  • 1 × Xbox 360 S Port Bezel
  • 1 × Xbox 360 S Right Chassis
  • 1 × Xbox 360 S Right Case Screw Set
Add New

Your contributions are licensed under the open source Creative Commons license.