Introduction

This guide explains how to quickly remove the side brush from your Roomba in order to either replace it or to further disassemble the device.

Parts

No parts required.

Place your Roomba upside-down on a hard surface.
  • Place your Roomba upside-down on a hard surface.

If all you need off is the faceplate, skip all of the screwdriver-based steps, and just remove the dirt bin(step 7) and start from step 11 at the rear.

David Forrest - Reply

Black Friday
Broken doesn't stand a chance.
While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
  • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

Add Comment

Gently pull upwards on the brush to remove it.
  • Gently pull upwards on the brush to remove it.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Aaron Jacobs

Member since: 01/31/2014

522 Reputation

4 Guides authored

Team

Cal Poly, Team 13-14, Regan Winter 2014 Member of Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

4 Members

13 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 211