Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

The pad is a disposable attachment that wipes the surface the robot drives over. If the cleaning pad on the iRobot Braava Jet 240 has become dirty and no longer cleans, use this guide to replace it. The cleaning pad should also be removed when replacing other parts of the robot, as the pad obscures several screws used to open the robot.

  1. Lift up the handle to reveal the eject button. Lift up the handle to reveal the eject button.
    • Lift up the handle to reveal the eject button.

  2. Use your finger to push the eject button forward. Use your finger to push the eject button forward. Use your finger to push the eject button forward.
    • Use your finger to push the eject button forward.

  3. Tilt the robot on its side and let the mop pad slide out.
    • Tilt the robot on its side and let the mop pad slide out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Claire Franz

Member since: 02/10/2020

1,385 Reputation

7 Guides authored

Team

Cal Poly, Team S22-G2, Regan Winter 2020 Member of Cal Poly, Team S22-G2, Regan Winter 2020

CPSU-REGAN-W20S22G2

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 14

All Time: 217