Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Use this guide to remove or replace the two pentalobe (five-point) screws securing the iPhone's display. These screws are a proprietary Apple design, requiring the use of a specialized P2 screwdriver.

Parts

No parts specified.

  1. Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Opening the iPhone's display will damage its waterproof seals. If you do not replace the seals, your phone will no longer be water resistant.

    • Remove the two 3.5 mm pentalobe screws from the bottom edge of the iPhone.

Adam O'Camb

Member since: 04/11/2015

143,053 Reputation

407 Guides authored

Team

iFixit Member of iFixit

Community

137 Members

16,779 Guides authored

View Statistics:

Past 24 Hours: 5

Past 7 Days: 36

Past 30 Days: 173

All Time: 9,619