Skip to main content

iPhone 6s のペンタロープネジの交換

What you need

  1. iPhone 6s のペンタロープネジの交換, ペンタロープネジ: step 1, image 1 of 1
    • iPhoneを分解する前に、バッテリーを25%以下まで消費してください。充電されたリチウムイオンバッテリーは、もしアクシデントで穴が空くと引火したり爆発する恐れがあります。

    • 分解する前に、iPhoneの電源をオフにします。

    • iPhoneの下端、Lightningコネクタの両側にある2つの3.4 mm P2 Pentalobeネジを外します。

Conclusion

デバイスを再組み立てする際は、ここまでの手順を逆の順番に従って作業を進めてください。

39 other people completed this guide.

Special thanks to these translators:

en jp

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Evan Noronha

Member since: 02/05/15

223,466 Reputation

168 Guides authored

2 Comments

I noticed both my pentalobe screws wouldn’t screw in last time. Upon checking the little components that the screws fix into were loose inside. Not a major drama but they also seem to hold the charger cable in place… or at least I’ve noticed cables are loose on my iPhone 6 since then. Is there a part I can buy to fix this issue, does anyone know please?

justingrisbrook - Reply

I have an iPhone 6s plus, but I got a new phone recently so I put my 6s plus in my side table and went back to it a couple of weeks later just to see that the pentalobe screws are missing and the phone will no longer charge, I also realized that when I plug the charger in its a bit loose. There was also nothing wrong with the phone before it worked perfectly fine.

Simoneil Ming - Reply

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 36

Past 30 Days: 150

All Time: 24,970