iPhone 6 iSclack Opening Procedure

Step 1 iSclack Opening Procedure

• The next three steps demonstrate using the iSclack, a great tool for safely opening the iPhone 6 that we recommend for anyone doing more than one repair. If you aren't using the iSclack, skip down three steps for an alternate method.
• If the plastic depth gauge is attached at the center of the iSclack, remove it now—it's not needed for larger phones like the iPhone 6.
• Close the handle on the iSclack, opening the suction-cup jaws.
Step 2



• Place the bottom of your iPhone in between the suction cups.
• Position the iSclack's upper suction cup against the display, just above (but not covering) the home button.
• Open the handles to close the jaws of the iSclack. Center the suction cups and press them firmly onto the top and bottom of the iPhone.
• If your display or back glass is badly cracked, covering it with a layer of clear packing tape may help the suction cups adhere. The iSclack also includes two pieces of tape for this purpose.
Step 3
• Hold onto your iPhone securely and close the handle of the iSclack to separate the suction cups, pulling the front panel up from the rear case.
• The iSclack is designed to safely open your iPhone just enough to separate the pieces, but not enough to damage the display cables.
• Peel the two suction cups off your iPhone.
• Skip the next three steps and continue on to Step 8.

Author

with 13 other contributors

Walter Galan

694,561 Reputation

1,203 Guides authored

Badges: 54

• 
• 
• 

+51 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview