Fix Your Stuff Community Store

iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prereq only for rear case.

What you need

  1. iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement, Audio Control and Rocker Switch Cable: step 1, image 1 of 1

    • Remove the following screws securing the audio controls and rocker switch to the rear case:

    • Two 2.0 mm Phillips #00 screws

    • One 2.5 mm Phillips #00 screw

    Edit

  3. iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement: step 2, image 1 of 3 iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement: step 2, image 2 of 3 iPhone 6 Plus Audio Control and Rocker Switch Cable Replacement: step 2, image 3 of 3

    • Grasp the audio control and rocker switch cable with a pair of tweezers.

    • Slowly peel the audio control and rocker switch cable up off the rear case.

    • Peel with care. The cable is secured to the rear case with mild adhesive.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 195