Skip to main content

iPhone 5s Camera Bracket Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. iPhone 5s Camera Bracket Replacement, Camera Bracket: step 1, image 1 of 1
    • Remove the two 1.6 mm Phillips #000 screws securing the rear-facing camera bracket.

    This is as far as I got. The top screw won’t come out. The bottom screw came out fine. Oh well, time to put everything back together again.

    Fredrik - Reply

  2. iPhone 5s Camera Bracket Replacement: step 2, image 1 of 1
    • Remove the rear-facing camera bracket from the rear case.

    It was not noted in this guide but be sure to place the tab on the LEFT UNDER when replacing the rear-facing camera bracket

    DAXimus - Reply

  3. iPhone 5s Camera Bracket Replacement: step 3, image 1 of 1
    • Remove the rubber camera bumper from the case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Member since: 10/18/12

465,278 Reputation

538 Guides authored

Team

iFixit Member of iFixit

Staff

136 Members

16,573 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 325