Skip to main content

Fix Your Stuff

Right to Repair

Store

  1. Remove the two 1.6 mm Phillips #000 screws securing the metal battery connector bracket to the logic board.
    • Remove the two 1.6 mm Phillips #000 screws securing the metal battery connector bracket to the logic board.

  2. Remove the metal battery connector bracket from the iPhone.
    • Remove the metal battery connector bracket from the iPhone.

  3. Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board. Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
    • Use the flat end of a spudger to gently pry the battery connector up from its socket on the logic board.

    • Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Sam Goldheart

Member since: 10/18/2012

422,572 Reputation

547 Guides authored

Team

iFixit Member of iFixit

Community

130 Members

13,331 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 5

All Time: 3,905