Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Prerequisite guide for accessing upper components in an iPad mini 4 LTE.

Parts

No parts specified.

  1. Run the pointed end of a spudger between the looped tape and the plastic cellular antenna housing to make it easier to peel the tape up. Run the pointed end of a spudger between the looped tape and the plastic cellular antenna housing to make it easier to peel the tape up.
    • Run the pointed end of a spudger between the looped tape and the plastic cellular antenna housing to make it easier to peel the tape up.

  2. Use tweezers to peel up the looped tape adhered over the upper component cable bracket. Use tweezers to peel up the looped tape adhered over the upper component cable bracket. Use tweezers to peel up the looped tape adhered over the upper component cable bracket.
    • Use tweezers to peel up the looped tape adhered over the upper component cable bracket.

  3. Remove the following four Phillips screws holding the upper component bracket in place:
    • Remove the following four Phillips screws holding the upper component bracket in place:

    • Two 2.1 mm screws

    • Two 1.2 mm screws

  4. Remove the upper component cable bracket.
    • Remove the upper component cable bracket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

Member since: 02/05/2015

182,032 Reputation

178 Guides authored

Team

iFixit Member of iFixit

Community

108 Members

9,940 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 34