Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Prereq for removing logic board with no battery.

  1. Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket. Use tweezers to peel the tape up the rest of the way, and remove it from the bracket. Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.
    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.

  2. Use a plastic opening tool to push the bracket slightly to the left. Use a plastic opening tool to push the bracket slightly to the left.
    • Use a plastic opening tool to push the bracket slightly to the left.

  3. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  4. Use a spudger tip to lift up the lower side of the bracket. Use a spudger tip to lift up the lower side of the bracket.
    • Use a spudger tip to lift up the lower side of the bracket.

  5. Remove the bracket with tweezers. During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.
    • Remove the bracket with tweezers.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 86