Fix Your Stuff Community Store

iPad 4 Wi-Fi Headphone Jack Cable Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Internal prereq.

What you need

  1. iPad 4 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: step 1, image 1 of 3 iPad 4 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: step 1, image 2 of 3 iPad 4 Wi-Fi Headphone Jack Cable Replacement, Headphone Jack Cable: step 1, image 3 of 3

    • Use tweezers to peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

    • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

    Edit

  3. iPad 4 Wi-Fi Headphone Jack Cable Replacement: step 2, image 1 of 2 iPad 4 Wi-Fi Headphone Jack Cable Replacement: step 2, image 2 of 2

    • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

    • Pull the headphone jack assembly cable straight out of its socket on the logic board.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 36