Fix Your Stuff Community Store

iPad 4 CDMA Logic Board Connectors Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Prereq only.

  1. iPad 4 CDMA Logic Board Connectors Replacement, Logic Board Connectors: step 1, image 1 of 1

    • Disconnect the following connectors from their respective sockets on the logic board:

    • Wi-Fi antenna cable

    • Speaker connector cable.

    • Dock/Lightning connector cable.

    • There may be a piece of black tape covering this connector. Remove it with tweezers.

    • Make sure to pry underneath the connector and not the socket itself. Prying on the socket itself may cause severe damage.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One Comment

is there a release for the speaker connector? i didn’t release anything and ripped the connections from the logic board off…

kvnplndrs - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 66