Skip to main content

iPad 3 4G Antenna Connectors Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. iPad 3 4G Antenna Connectors Replacement, Antenna Connectors: step 1, image 1 of 1
    • Remove the seven screws securing the logic board to the rear aluminum panel.

    • Six 2.1mm Phillips #00

    • One 2.5mm Phillips #00

  2. iPad 3 4G Antenna Connectors Replacement: step 2, image 1 of 1
    • Flip the logic board over, minding any cables that may get caught.

    • Using the tip of a spudger, remove the three antenna connectors from their sockets on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Member since: 04/12/10

127,749 Reputation

143 Guides authored

Team

iFixit Member of iFixit

Staff

136 Members

16,558 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65