iPad 2 Wi-Fi EMC 2415 LCD Replacement

Step 1 LCD

• Remove the four 2.0 mm Phillips screws securing the LCD to the rear case.
Step 2



• Lift the LCD from its long edge closest to the volume buttons and rotate it out of the rear case.
• Lay the LCD on the front panel as seen in the second picture.
Step 3
• Use the edge of a plastic opening tool to flip up the metal retaining clip securing the display data cable to its socket on the logic board.
Step 4
• Pull the display data cable out of its socket on the logic board.
• Do not lift upward on the display data cable connector as you disconnect it.
Step 5
• Remove the LCD assembly from the iPad 2.

Author

with 5 other contributors

Andrew Bookholt

586,109 Reputation

619 Guides authored

Badges: 47

• 
• 
• 

+44 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview