Skip to main content

Introduction

This guide is a prereq only. Used to install transferred home button.

Parts

No parts specified.

  1. Carefully grasp the home button with a pair of tweezers. Gently lower and place the home button into the round opening located at the bottom of the front panel. The correct orientation of the home button is shown in the third picture. Make sure the back of the home button is face up and the flat portion of the inner home button circle is oriented to the top of the iPad.
    • Carefully grasp the home button with a pair of tweezers.

    • Gently lower and place the home button into the round opening located at the bottom of the front panel.

    • The correct orientation of the home button is shown in the third picture. Make sure the back of the home button is face up and the flat portion of the inner home button circle is oriented to the top of the iPad.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

Member since: 10/17/2009

423,374 Reputation

411 Guides authored

Team

iFixit Member of iFixit

Community

101 Members

9,072 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 282