iMac Intel 21.5" Retina 4K Display Lower Support Bracket Replacement

Step 1 Lower Support Bracket



• Remove the following five Phillips screws holding the lower support bracket in place:
• Four 3.2 mm screws
• One 1.7 mm screw
• On at least some EMC 2544 machines, all five screws are the same size.
• You may need to peel up the display adhesive lining the bottom edge of the iMac enclosure to access the screws.
Step 2

• Remove the lower support bracket from the iMac enclosure.

Author

with 4 other contributors

Evan Noronha

Member since: 02/05/15

223,424 Reputation

168 Guides authored

Badges: 49

• 
• 
• 

+46 more badges

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview