Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Prerequisite only guide for removing the hard drive assembly from a 21.5" Retina 4K Late 2015 iMac.

Parts

No parts specified.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

  2. Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive. Remove the hard drive assembly from the iMac. Remove the hard drive assembly from the iMac.
    • Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive.

    • Remove the hard drive assembly from the iMac.

Evan Noronha

Member since: 02/05/2015

208,672 Reputation

178 Guides authored

Team

iFixit Member of iFixit

Community

136 Members

16,682 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 8

All Time: 273