Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Prereq only.

Parts

No parts specified.

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac. The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is attached by a single SATA power/data cable, do not attempt to fully remove it from the iMac.

  2. Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits

    Nintendo Switch Kits

    A quick fix to get back in the game

    Shop Switch Kits
  3. Use a spudger to disconnect the single SATA power and data combo cable. Use a spudger to disconnect the single SATA power and data combo cable. Use a spudger to disconnect the single SATA power and data combo cable.
    • Use a spudger to disconnect the single SATA power and data combo cable.

  4. Remove the hard drive from the iMac.
    • Remove the hard drive from the iMac.

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 48