Skip to main content

Introduction

Prereq to remove fan after hard drive brackets.

Parts

No parts specified.

  1. Gently pull the fan cable connector straight away from its socket on the logic board. Gently pull the fan cable connector straight away from its socket on the logic board.
    • Gently pull the fan cable connector straight away from its socket on the logic board.

  2. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  3. Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.
    • Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.

  4. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Lionheart

Member since: 10/18/2012

367,397 Reputation

537 Guides authored

Team

iFixit Member of iFixit

Community

104 Members

8,413 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 21