Skip to main content

iMac Intel 21.5" EMC 2428 Hard Drive Replacement

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. iMac Intel 21.5" EMC 2428 Hard Drive Replacement, Hard Drive: step 1, image 1 of 1
    • Remove the two 9 mm T10 Torx screws securing the upper hard drive bracket to the outer case.

  2. iMac Intel 21.5" EMC 2428 Hard Drive Replacement: step 2, image 1 of 1
    • Slightly rotate the hard drive out of the outer case and lift it up off its mounting pins toward the top edge of the iMac.

    • Be careful not to contact the AirPort card as you lift the hard drive out of its recess.

  3. iMac Intel 21.5" EMC 2428 Hard Drive Replacement: step 3, image 1 of 2 iMac Intel 21.5" EMC 2428 Hard Drive Replacement: step 3, image 2 of 2
    • Disconnect the SATA data cable and SATA power connector from their respective sockets by pulling each connector away from the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 335