Introduction
Upgrade your RAM for an instant increase in speed.
What you need
-
-
Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
-
Remove the access door from your iMac.
-
-
-
-
Use the sharp tip of a spudger to pull the black plastic RAM tabs out of the memory bay.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
111 other people completed this guide.
In order for the logic board to come out cleanly, one should remove the RAM at the end of this step.
kevmacmills - Reply
Definitely! The author should make this as a step in the description (because not everyone reads Comments)
finnik2d - Reply
Just did this procedure and the RAM must absolutely come out for the logic board to come free later.
matt - Reply