iMac Intel 21.5" EMC 2308 Access Door Replacement

You're viewing a previously published version of this guide. View latest version

Nov 13, 2015 - 05:35:30

Nov 13, 2015 - 05:35:30 Nov 13, 2015 - 05:35:30 Nov 11, 2015 - 04:59:27 Oct 30, 2015 - 09:10:52 Oct 30, 2015 - 09:10:52 May 13, 2015 - 06:14:07 May 13, 2015 - 06:14:07 Jul 31, 2013 - 04:10:27 Jun 15, 2012 - 09:40:08 May 31, 2011 - 10:40:10 Apr 01, 2010 - 12:18:43 Feb 04, 2010 - 06:22:14 Feb 04, 2010 - 06:22:14 Feb 04, 2010 - 06:22:05 Feb 04, 2010 - 06:21:55 Feb 04, 2010 - 06:21:55 Feb 03, 2010 - 12:28:18 Feb 03, 2010 - 12:28:17 Feb 03, 2010 - 12:27:03 Feb 03, 2010 - 12:27:02 Feb 03, 2010 - 12:26:53 Feb 03, 2010 - 12:26:53 Feb 03, 2010 - 12:25:35 Feb 03, 2010 - 12:25:12

Newer

Introduction

Remove the access door to replace RAM chips.

What you need

Step 1 Access Door

iMac Intel 21.5" EMC 2308 Access Door Replacement, Access Door: step 1, image 1 of 2

iMac Intel 21.5" EMC 2308 Access Door Replacement, Access Door: step 1, image 2 of 2

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
These screws will remain captive in the access door.
Remove the access door from your iMac.
During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.