Skip to main content

iHome IH11 Dock Connector Replacement

What you need

  1. iHome IH11 Dock Connector Replacement, Dock Connector: step 1, image 1 of 1
    • Remove the two 9mm screws that hold on the dock connector with a Phillips #1 Screwdriver.

  2. iHome IH11 Dock Connector Replacement: step 2, image 1 of 2 iHome IH11 Dock Connector Replacement: step 2, image 2 of 2
    • Pop the dock connector out of the iHome and gently pull the white plastic plug connected to the dock connector apart.

    • Remove the four 7.0mm screws with a Phillips #1 screwdriver.

  3. iHome IH11 Dock Connector Replacement: step 3, image 1 of 1
    • Remove both of the black plastic pieces. They should easily slide off of the two guide holes in the circuit board.

    • The dock connector should now be exposed. You can now simply put your new dock connector in the old one's place.

    Where can. I find the. Pin out. For this. Connector

    Roy H - Reply

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Nick Knowles

Member since: 04/19/13

21 Reputation

2 Guides authored

Team

Cal Poly, Team 14-9, Maness Spring 2013 Member of Cal Poly, Team 14-9, Maness Spring 2013

CPSU-MANESS-S13S14G9

5 Members

5 Guides authored

2 Comments

Where can I buy a replacement dock connector?

A Ross - Reply

Likewise, this guide isn't much good if it uses parts that are unavailable.

CJ Shumate - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2,390