Introduction

Follow these easy steps for battery replacement. This includes how to remove the battery case cover, clean the battery case, and replace the batteries.

1. Place the device on a flat surface as shown.
  • 1. Place the device on a flat surface as shown.

  • The battery case cover is found at the bottom of the device.

  • 2. To remove the battery case cover, push down gently and slide the cover in the direction that the arrows indicate.

Add Comment

1. Remove and discard the old batteries. 2. Use the detailing brush and a paper towel to remove any corrosion left by previous batteries. 2. Use the detailing brush and a paper towel to remove any corrosion left by previous batteries.
  • 1. Remove and discard the old batteries.

  • 2. Use the detailing brush and a paper towel to remove any corrosion left by previous batteries.

Add Comment

Insert batteries with the "-", or dull side, facing the springs.
  • Insert batteries with the "-", or dull side, facing the springs.

  • If you are replacing the stand, you'll insert the batteries last.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Cristina Garcia

Member since: 10/13/2014

301 Reputation

3 Guides authored

Team

Clemson, Team 3-4, Benson Fall 2014 Member of Clemson, Team 3-4, Benson Fall 2014

CLEM-BENSON-F14S3G4

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 324