Skip to main content

iBook G3 14" Airport Card Replacement

What you need

  1. iBook G3 14" Airport Card Replacement, Battery: step 1, image 1 of 1
    • Use a coin to rotate the battery locking screw 90 degrees clockwise.

    • Lift the battery out of the computer.

  2. iBook G3 14" Airport Card Replacement, Airport Card: step 2, image 1 of 1
    • Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

    • If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

    • Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

  3. iBook G3 14" Airport Card Replacement: step 3, image 1 of 1
    • If your computer does not have an Airport card installed, skip to the RAM shield removal step.

    • Push the wire clasp toward the Airport card and pull it up to free it from the RAM shield.

  4. iBook G3 14" Airport Card Replacement: step 4, image 1 of 1
    • Grasp the clear plastic tab on the Airport card and pull toward the right.

  5. iBook G3 14" Airport Card Replacement: step 5, image 1 of 1
    • Hold the Airport card in one hand and use your other hand to remove the antenna cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Attached Documents

iRobot

Member since: 09/24/09

1 Reputation

636 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 6

All Time: 7,997