Changes to Step #10

Edit by Walter Galan

Edit approved

Deleted
Added
Unchanged

Step Lines

[* black] Support the display with one hand while removing the following 3 screws:
[* blackred] Two 9.5 mm silver T6 Torx screws with threads on only part of the shaft on the inside of the display hinges.
[* blackorange] One 9.5 mm silver T6 Torx screw with threads on the entire shaft on the outside of the left hinge.
[* blackred] Two 9.5 mm silver T6 Torx screws with threads on only part of the shaft on the inside of the display hinges.
[* blackorange] One 9.5 mm silver T6 Torx screw with threads on the entire shaft on the outside of the left hinge.
[* black] Grasp the display assembly on both sides and lift it up and out of the computer.

Image 1

No previous image

Added

Image 2

No previous image

Added