Changes to Step #13

Edit by Walter Galan

Edit approved

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following 7 screws/standoffs:
[* red] Four black T6 Torx screws securing the left I/O board to the lower case.
[* orange] Two silver T6 Torx screws securing the battery connector to the lower case.
[* yellow] One 4 mm standoff located between the audio jacks.
[* black] Lift the left I/O board up from the right side and slide it out of the computer.

Image 1

Old Version

New Version

Image 2

Old Version

New Version