Changes to Step #26

Edit by Topher

Pending approval

Deleted
Added
Unchanged

Step #26 Lines

[* standard] Removing the Airport card.
[* standard] Disconnect the antenna connector and the data cable.
[* standard] Remove the two screws.
[* standard] The Bluetooth cable disappears into the display, and our sources tell us that it's sandwiched between the glass and the metal case. This means that if your Bluetooth goes out, you may have to replace the entire display!
[* black] Another option is to carefully heat up the edges of the glass and use suction cups to lift the glass off. If you do succeed in taking the glass off, the Bluetooth cable follows the right edge of the screen, just under the screen's screws. The Bluetooth and camera driver are located on the top and can easily be replaced when the glass has been removed.