Changes to Step #19

Edit by iRobot

Edit approved

Deleted
Added
Unchanged

Step #19 Lines

[* blackstandard] Removing the logic board.
[* black] Gently slide the board a little to the left so that the connectors will be able to clear the right side of the case.
[* black] Tilt the rear of the board up and lift slightly, as shown in the photo, to allow the removal of the power cable from the underside of the board, near the center.
[* blackstandard] Removing the logic board.
[* black] Gently slide the board a little to the left so that the connectors will be able to clear the right side of the case.
[* black] Tilt the rear of the board up and lift slightly, as shown in the photo, to allow the removal of the power cable from the underside of the board, near the center.
[* icon_note] We're noticing a lot of hardware similarities between the MacBook Air, new Macbook, and this MacBook Pro.
[* icon_note] Apple has taken their new manufacturing approach to heart, and is using the flexibility it provides to standardize as much of their design as possible.