Changes to Step #0

Edit by Andrew Bookholt

Edit approved

Deleted
Added
Unchanged

Step #0 Lines

[* black] DisconnectPry the two connectors, one atfan connectors up off their sockets on the bottom right of each fanlogic board.
[* black] DisconnectPry the two connectors, one atfan connectors up off their sockets on the bottom right of each fanlogic board.
[* standard] Remove the following 6 screws:
[* red] Three 3.1 mm Philips screws.
[* orange] Three 3.7 mm Philips screws.