Changes to Step #24

Edit by enfa

Edit declined by David Hodson

Deleted
Added
Unchanged

Step #24 Lines

[* black] Rotate the hard drive out of the framework and place it so that the connector is facing up.
[* black] Use a spudger to flip up the long, thin black plastic tab holding the orange hard drive ribbon in place. The beige component does not move. The tab will rotate up 90 degrees, releasing the ribbon cable.
[* black] Use a spudger to flip up the long, thin black plastic tab holding the orange hard drive ribbon in place. The beige component does not move. The tab will rotate up 90 degrees, releasing the ribbon cable.