Changes to Step #0

Edit by Andrew Bookholt

Edit approved

Deleted
Added
Unchanged

Step #0 Lines

[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_reminder] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Insert wisdom hereLift the camera cable retainer out of the upper case.
[* red] Remove the two 8 mm Phillips screws securing the camera cable retainer to the upper case.
[* icon_reminder] One of the screws may remain captive in the camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Insert wisdom hereLift the camera cable retainer out of the upper case.

Image 1

Old Version

New Version