Changes to Step #5

Edit by Andrew Bookholt

Edit approved

Deleted
Added
Unchanged

Step #5 Lines

[* icon_note] This step is only required if you have an anti-glare display.
[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[* black] Lift the Bluetooth board/cable retainer assembly out of the upper case.

Image 1

No previous image

Added

Image 2

No previous image

Added