Changes to Step #7

Edit by Andrew Optimus Goldberg

Edit approved by Andrew Optimus Goldberg

Deleted
Added
Unchanged

Step Lines

[* black] Two quick flicks disconnect the LCD and digitizer cables, leaving only the battery cable as a final umbilical cord between the two halves of the device.
[* black] The battery is both adhered to the back of the display assembly and soldered to the logic board.
[* black] Unfortunately, the convenienceconnivance and cost savings of adhesive come at the cost of repairability.
[* black] Unfortunately, the convenienceconnivance and cost savings of adhesive come at the cost of repairability.