Changes to Step #4

Edit by Andrew Optimus Goldberg

Edit approved by Andrew Optimus Goldberg

Deleted
Added
Unchanged

Step #4 Lines

[* black] Insert the edge of a plastic opening tool between the battery and the rear case near the bottom the iPhone.
[* black] Run the plastic opening tool along the right edge of the battery and pry up at several points to completely separate it from the adhesive securing it to the rear case.
[* icon_caution] Do not pry up too hard, as this may permanently deform or puncture the batterybattery or damage the logic board.
[* icon_caution] Do not pry up too hard, as this may permanently deform or puncture the batterybattery or damage the logic board.